Guaranteed compatible upgrades for:
HP/Compaq ProLiant Server ML350p Gen8 (G8)
System Specifications
Maximum Memory:
- 128GB ECC UDIMMs
- 384GB Reg ECC RDIMMs
- 768GB LRDIMMs
Expansion:
- 24 Sockets using two processors 12 Sockets (4 banks of 3) per processor
Standard Memory:
- 8GB (Removable) or
- 16GB (Removable)
CPU/Chipset:
- Intel Xeon Intel C600 Series
- Intel Xeon Intel C600 Series
Bus Architecture:
- PCI Express; PCI-X; SSD - SATA 2.5-inch 9.5mm; SSD - SATA 3.5-inch
Mfr's System P/N's:
- 470065-652; 470065-713; 470065-818; 646675-001; 646676-001; 646677-001; 646678-001; 668889-035; 669045-425; 678237-001; 736974-035; 736974-425; 736978-045; 736978-425; 736983-S01
Upgrade Path:
- Virtually any configuration up to 384GB can be reached using 8 and 16GB modules.
Comments:
- General memory guidelines
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- White DIMM slots denote the first slot of a channel.
- For 1 DPC (DIMM per channel) populate white slots only.
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- Install DIMMs only if the corresponding processor is installed.
- If only one processor is installed in a two processor system, only half of the DIMM slots are available.
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- To maximize performance, balance the total memory capacity between all installed processors.
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel.
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor.
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- Do not mix UDIMMs, RDIMMs or LRDIMMs.
- Quad rank LR DIMMs are supported at 3 DIMMs per channel.
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- DIMMs of different voltages (1.35 V & 1.5 V) may be mixed in any order.
- The system will power them at the higher voltage.
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- DIMMs of different speed grades may be mixed in any order.
- The system will select a common optimal speed.
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- Memory speed is a function of the processor QPI bus speed.
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- Population guidelines:
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- There are four (4) channels per processor; eight (8) channels per server.
- There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots.
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
- Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available.
- When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC).
- It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
- 1.35V LV RDIMMs up to 2DPC.
- Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
- See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
- The two parts may be installed in the same system but not within the same memory bank.
- Use like modules for dual and triple channel operation
- Memory channels1 and 3 consists of the three (3) DIMMs that are furthest from the processor.
- Memory channel 2 and 4 consists of the three (3) DIMMs that are closest to the processor.