- 4 Sockets
- 8 GB (Removable)
- Intel Core i7 3.4 GHz
- Flash - SDXC; SSD - SATA 2.5-inch 9.5mm
Mfr's System P/N's:
- MC813B/A; MC813D/A; MC813F/A; MC813FN/A; MC813H/A; MC813K/A; MC813LE/A; MC813LL/A; MC813N/A; MC813S/A; MC813SM/A; MC813T/A; MC814B/A; MC814D/A; MC814F/A; MC814FN/A; MC814H/A; MC814K/A; MC814LE/A; MC814LL/A; MC814N/A; MC814S/A; MC814SM/A; MC814T/A
- Virtually any configuration up to 32GB can be reached using any combination of 1GB, 2GB, 4GB, and 8GB modules.
- iMac13,2 27-inch Late 2012 EMC 2546
- INSTALLATION GUIDES
- - RAM upgrade guide
- - HDD upgrade guide
- - Blade SSD install guide
- RAM Upgrade
- Up to 32GB of RAM can be installed. Choose your ram modules on the left. To install the RAM, you'll need a Spudger. Follow this guide to install the RAM modules.
- The iMac13,2 has a 1TB 3.5-inch factory HDD with a 6 Gb/s SATA port. At the time of purchase, Apple offered a 1 TB or 3TB "Fusion Drive" (which combines a 128GB ‘blade’ SSD and a 1TB/3TB hard drive), or a stand-alone 768GB blade SSD. To upgrade the existing HDD, purchase a larger 3.5-inch HDD along with the Hard Drive Upgrade kit.
- To clone your existing OS/app setup first, purchase an external 3.5-inch HDD enclosure or dock and put your new HDD in it, then use the Super Duper app to perform the clone, then switch the drives. The enclosure can also house your old HDD.
- If you have a ‘Fusion drive’ setup, then you’ll need to split the fusion drive first and then perform the clone operation before upgrading the HDD.
- To upgrade the factory 3.5-inch HDD to an SSD, purchase any 2.5-inch SSD along with the same Hard Drive Upgrade kit. Plus, you’ll need to add in the OWC Adaptadrive 3.5-inch to 2.5-inch drive converter
- To clone your existing OS/app setup first, purchase a cloning cable or 2.5-inch HDD/SDD enclosure to connect your new SSD to your mac, then use the Super Duper app to perform the clone, then switch the drives. Your old 3.5-inch HDD can be housed in this 3.5-inch HDD enclosure.
- If you have a ‘Fusion drive’ setup, then you’ll need to split the fusion drive first and then perform the clone operation.
- HDD + SSD or SSD -> SSD
- The 27-Inch "Late 2012" and "Late 2013" as well as the "Late 2014" and "Mid-2015" Retina/5K iMac models all have the necessary connector on the motherboard to add in an additional ‘blade’ SSD, even if the system only is configured with a hard drive at the time of purchase.
- To add in a ‘blade’ SSD or upgrade the existing factory SSD, you’ll need the servicing kit to open up the Mac, plus one of the OWC Aura SSD’s on the left.
- There is no housing available for the OWC Aura blade SSD, so you’ll need to use Time Machine to backup your drive first if you want to restore later. You can house your factory Apple blade SSD in the Envoy Pro enclosure.
- If you have only have a 'Blade' SSD installed
- All 'Tapered Edge' iMac's from the Late 2012 iMac13,1 up to the "Mid-2017" iMac18,3 models have a 6 Gb/s Serial ATA (Revision 3.0) connector that is occupied by a hard drive in the default configurations. However, if you customised your model and it only has a 'Blade' SSD installed, then you can still install a standard SATA 2.5" hard drive in 21.5-Inch models and a 3.5" hard drive in 27-Inch models. An SSD can also be installed in this hard drive space as well.