- 2 Sockets
- 512MB (Removable)
- Intel Core Duo 1.83 GHz
Mfr's System P/N's:
- Virtually any configuration up to 2GB can be reached using 1GB modules or kits.
- iMac4,1 (early 2006 17 inch core duo) EMC 2014
- INSTALLATION GUIDES
- - RAM upgrade guide
- - HDD/SSD upgrade guide
- RAM Upgrade
- This iMac can be upgraded to a total of 2GB (1GB x2) of RAM. Choose your ram modules on the left. The only tools you need is a Phillips #1 Screwdriver. Then follow this guide to install the RAM.
- This iMac has a 160GB 3.5-inch factory HDD connected to a 1.5 Gb/s SATA port. To upgrade the existing HDD, you’ll need a larger 3.5-inch HDD along with the Essential Electronics Toolkit and a set of Plastic Opening Cards. No additional thermal sensor cable was needed in iMac’s up to the late 2009 models.
- To clone your existing OS/app setup first, purchase an external 3.5-inch HDD enclosure or dock and put your new HDD in it, then use the Super Duper app to perform the clone, then switch the drives. The enclosure can also house your old HDD.
- Even though this machine has a first generation SATA port, significant I/O and data transfer rate gains can be had by upgrading the factory 3.5-inch HDD to an SSD. For this, you’ll need to purchase any 2.5-inch SSD along with the same Essential Electronics Toolkit and Plastic Cards. Plus, you’ll need to add in the OWC Adaptadrive 3.5-inch to 2.5-inch drive converter.
- To clone your existing OS/app setup first, purchase a cloning cable or 2.5-inch HDD/SDD enclosure to connect your new SSD to your mac, then use the Super Duper app to perform the clone, then switch the drives. Your old 3.5-inch HDD can be housed in this enclosure.