Crucial 16GB (2x 8GB) DDR3L-1600 PC3L-12800 1.35V / 1.5V DR x8 ECC 240-pin EUDIMM RAM Kit
Dramatically improve performance and handle larger user and application workloads in your mission critical workstations and servers with this 16GB (2x 8GB) DDR3L 1600 MT/s 240-pin EUDIMM RAM kit from Crucial . This Dual rank, x8 configuration RAM kit is for use in DDR3L compatible systems and operates at 1600 MT/s with an overall transfer rate of PC3L-12800.
This RAM kit also operates at a standard voltage of 1.35V / 1.5V and is designed to allow you to run more applications simultaneously, switch between them faster, and provide a smoother computing experience.
|Capacity||16GB (2x 8GB)|
|Speed||DDR3L-1600 - 1600MT/s - PC3L-12800|
|Voltage||1.35V / 1.5V|
|Form Factor||240-pin EUDIMM|
|Pieces in Kit||2|
You can verify the compatibility of this RAM kit in a number of ways:
- Use the RamCity Finder to see all guaranteed compatible RAM upgrades for your brand and model system or motherboard
- Search online to see if this product is on the QVL (Qualified Vendor List) for your system or motherboard
- Contact one of our Upgrade Evangelists for an expert opinion
Why is the speed of this RAM kit shown as 1600 MT/s instead of 1600 Mhz?
When it comes to measuring DDR RAM speed, MT/s and MHz are used interchangeably, which is not actually correct.
DDR stands for double data rate which means data is transfers on both the rising and falling edges of the clock signal. Meaning that the transfer rate is roughly twice the speed of the I/O bus clock. This RAM kit runs at 800MHz per second, but the effective rate is 1600 megatransfers per second (MT/s) because there are 800 million rising edges per second and 800 million falling edges per second of a clock signal running at 800 MHz.
Dual Voltage for Newer and Older systems
This RAM kit supports voltages of both 1.35V and 1.5V. If your original installed memory is 1.5V and you are adding a dual-voltage 1.35V/1.5V module to an open DIMM slot, this dual-voltage RAM kit will operate at 1.5V, not 1.35V. If all installed memory modules are dual-voltage 1.35V/1.5V and the system supports DDR3L (1.35V low voltage), then this RAM kit will run at 1.35V.
Save 25% and more over buying a pre-configured server or workstation
Memory and storage account for over half of a typical server’s bill of materials (BOM) cost. Your CTO wants to keep a lid on spending but you need hardware that delivers the performance that your users need. By purchasing servers or workstations with minimal preinstalled components and then installing Crucial server memory, you can save 25% or more on your RAM costs – and maintain your OEM server warranties.
But don't I need to buy RAM and Storage components from my OEM to maintain the warranty?
Similar to how you can upgrade a system’s preinstalled processor or graphics card and choose whichever brand you want, you can also do the same with memory and storage. Laws in Australia, U.S. and all over the world protect comsumers and businesses so that you can swap out manufacturer pre-installed components for more cost-effective third-party components and still retain your product’s warranty. In practical terms, this means you can upgrade to Crucial brand memory without voiding your system’s original warranty. Don’t just take our word for it though, here’s what the manufacturer warranties say:
Samsung 870 Evo 4TB 2.5" 7mm SATA III Internal SSD
Crucial MX500 2TB 2.5" 7mm SATA III Internal SSD (with 7mm to 9.5mm spacer)
Seagate 2TB BarraCuda 5400 RPM 128MB Cache SATA 6.0Gb/s 2.5" 7mm Laptop Internal Hard Drive