Crucial MX500 250GB 2.5" 7mm SATA III Internal SSD (with 7mm to 9.5mm spacer)
Crucial MX500 500GB 2.5" 7mm SATA III Internal SSD (with 7mm to 9.5mm spacer)
Crucial MX500 1TB 2.5" 7mm SATA III Internal SSD (with 7mm to 9.5mm spacer)
Crucial MX500 2TB 2.5" 7mm SATA III Internal SSD (with 7mm to 9.5mm spacer)
Samsung 2GB (1x 2GB) DDR3-1066 PC3-8500 1.5V DR x8 204-pin SODIMM RAM Module
Crucial 4GB (1x 4GB) CL7 DDR3L-1066 PC3L-8500 1.35V / 1.5V DR x8 204-pin SODIMM RAM Module for Mac (or PC)
Crucial 8GB (2x 4GB) CL7 DDR3L-1066 PC3L-8500 1.35V / 1.5V DR x8 204-pin SODIMM RAM Kit for Mac (or PC)
WD Blue 1TB 5400 RPM 128MB Cache SATA 6.0Gb/s 2.5" 7mm Laptop Internal Hard Drive
Seagate 2TB BarraCuda 5400 RPM 128MB Cache SATA 6.0Gb/s 2.5" 7mm Laptop Internal Hard Drive
- 2 Sockets
- 2GB (Removable) or
- 4GB (Removable)
- Intel Core 2 Duo 3.06 GHz
- SSD - SATA 2.5-inch 9.5mm
- MC226LL/A; MC226T/A
- Virtually any configuration up to 8GB can be reached using 2GB and 4GB modules.
- MacBookPro5,2 17-inch Mid-2009 A1297 EMC 2329
- INSTALLATION GUIDES
- - RAM upgrade guide
- - HDD/SSD upgrade guide
- - Dual HDD/SSD install guide
- - Battery replacement
- RAM Upgrade
- This mac can be upgraded to a maximum of 8GB of RAM (4GB x2). Choose your ram modules on the left. All the tools you'll need are in the Essential Electronics Toolkit and an Medium Anti-static mat is also recommended. Then follow this guide to install the RAM.
- HDD->HDD / SSD
- By default, this model is configured with a 500GB 2.5-inch hard drive connected to 3.0Gb/s SATA port. To upgrade the existing 2.5-inch HDD to a larger capacity HDD or high performance SSD, purchase the same tools as for the RAM upgrade above, and follow this guide. Plus you’ll need a larger 2.5-inch HDD or 2.5-inch SSD.
- To clone your existing OS/app setup first, purchase a cloning cable or 2.5-inch HDD/SDD enclosure to connect your new SSD to your mac, then use the Super Duper app to perform the clone, then switch the drives. You can keep your old 2.5-inch HDD in the enclosure for external storage.
- HDD + HDD/SSD
- Adding a second drive requires replacement of the existing DVD-drive using this Dual Drive Kit, which also contains all of the required tools and driver bits. Follow this guide to do the installation. And of course, you’ll need a new 2.5-inch HDD or 2.5-inch SSD to go in the new enclosure.
- A Battery replacement is available for this system (see the bottom of the product page for installation video).